| |
|
On this page you will
find details of the seals that can be
used on our range of Embossing Presses.
To
return to the Embossing Presses home page,
please click here.
For a full List of Prices
of our Presses and Seals, please click
here.
|
|
Seal Styles
Modeled Seals
Modeled seal are required
to produce fully contoured embossed
images such as Coats of Arms. Depending
upon your requirements these dies can be
produced by hand or by the latest
computerised engraving systems. |
 |
Machine Engraved Seals
Many companies and
organisations choose to incorporate a
logo within their seals or embossing
press. These dies are engraved using the
latest computerised engraving system to
create a personalised seal. This process
is suitable for most types of design |
|
Standard Circular Seals
The popular hand plier
and the more traditional Company Seal
(Level Press) are the two most popular
sealing devices in our range. Used
extensively as an attractive part the
company registration package.
Conveniently set within two rings they
are the preferred method od marking
official documents, certificates and a
whole host of other stationery. |
 |
Address & VTS Press Seals
The popular address press
is used to emboss addresses on to
letters or as a return address on
envelopes. The VTS press is similar in
style to the address seal but is
exclusively used by MOT centres to
authenticate certificates.
|
 |
Traditional Brass Wax Seals
|
The Brass Wax Seal makes
an ideal gift for Christmas,
engagements, weddings and anniversaries.
Engraved in solid brass with a wooden
handle it makes the ideal gift for
special occasions.
In today's standardised,
mass produced society, the traditional
look of the wax seal has many
applications: Personal stationery seal;
Sealing invitations for weddings and
other occasions; Endorsing certificates
and diplomas; Sealing limited edition
prints; Corporate gifts. |
 |
Initials are a very popular
choice for wax seals and are available in most
fonts including script. If you wish to add your
own specific graphic to your seal simply fax or
e-mail your design to us, and we will provide
you with an immediate quotation.
Brass Wax Seals are available in
two standard sizes - 25mm and 38mm diameter.
Other sizes are available on request.
Self Adhesive Seal Wafers & Sealing
Wax
Self-adhesive wafers are available in gold,
silver, metallic and matt red and are sold in
packs of fifty. Three sizes are available -
45mm, 51mm and 65mm diameter. Please note that
the 65mm are only available in matt red.
Sealing Wax
Mura Sealing Wax - Mura
wax sticks measure 10cm in length and have a
taper wick. When using a taper wick wax stick,
it must be held at an angle with the point
downwards so that the flame rises to melt the
wax nearest to the wick. The molten wax drops
onto the article to be sealed. When sufficient
wax has been applied to the surface, stir with
the end of the stick to level, before applying
the seal.
Bank of England Wax - As
this wax has no taper, it can be easily broken
up and heated in a pan or wax heater / dispenser
and is therefore ideal for use on large volumes
of sealing. The sticks are 20cm long.
The Thermofolow Wax Heater & Dispenser
|
The Thermaflow stores
approximately 1/2 pint of melted wax,
ready for use at any time.
Easy to use, simply hold
the dispenser by the pistol grip over
the area where wax is required and
depress the lever. The heater may be
retained in its stand to seal documents
or held manually for larger
applications. A removeable drip tray is
provided for easy cleaning.
The Thermoflow
provides: An efficient use of wax;
Consistent results; A variable flow of
wax; and Quicker application with no
mess. |
 |
For details about seals for
use in conjunction with these presses please
click here. For a full
list of prices for the Presses shown below,
please click here. |
